7820B

Features & Benefits:

Construction – Stainless steel weight platter.Die cast aluminum base and loadbridge.Aluminum handle.

Remote Display – 6-digit backlit display housed in an extruded enclosure with a 1.5" cable assembly with RJ45 connector. Includes 6" magnetic strip.

Remote Display Enunciators – Zero – Indicates the scale is at zero weight. Hold – Indicates the weight hold feature is active. AC Power – Indicates AC Power is connected to the scale and charging the battery

Remote Display Controls – Zero Key – Includes 2% Auto Zero tracking or manual push button to reestablish zero reference. Turns the scale OFF, when operated via battery.

Hold Key – Enables or disables weight hold feature. Enters into backlit and weight hold setting confi guration.

Weigh Hold Settings – Single – Allows you to hold the parcel weight on the display for one parcel Auto – Allows you to hold the parcel weight on the display for unlimited parcels. Sealed – Some states may not accept weight hold in NTEP approved applications. The sealed mode disables the weight feature.

Backlit Settings – Auto – Back light turns off after 5 seconds of non use. On – Back light is always on. Off – Back light is always off.

Battery Conservation – Sleep – After 5 minutes of non-use the scale will enter into sleep mode. Pressing the zero key will re-activate the scale Auto Shutdown – After 1 hour of non use the scale will shutdown. Pressing the restart button will re-start the scale.

Restart Button – While in battery operaton mode, the restart button (located on the rear of the scale) turns on the scale.

Hard Wired Battery Cable – Battery cable is hard wired to main PCB, no external connections.

Battery Life – Stored, no use - 14 days. Back light Off - 40 hours. Back light On - 12 hours. Back light Auto - 24 hours. Re-charge time - 8 hours. Re-charge cycles - 400 minimum

RS-232 Interface – 9 pin using Standard NCI protocol

Field Calibration – Alternate span points, 10 or 50 lbs, can simplify fi eld calibration. Can be set up either in decimal pounds or kilogram.

Specifications:

Capacity:
200 x 0.05 lb
Note: Rounding method is scale.

Internal Resolution – 1 part in 120,000

Dimensions – 12" x 19.5" x 4.6" (318 mm x 495 mm x 117 mm) standard confi guration 12" x 14" x 4.1" (318 mm x 358 mm x 104 mm), no handle

AC Power – Inline Transformer, UL/CSA Approved – Input: 120 VAC (+10%-15%), 60Hz standard 3-wire ground Output: 14 VDC (min) @ 730 mA DC - 12 VDC/1.3AH Sealed lead acid battery

Operating Environment – Temperature: 42 degree F to 104 degree F (5 degree C to 40 degree C) Relative Humidity: 10 to 95% (non-condensing)

Agency Approvals – United States: NTEP #95-070 For use as a Class lll device

Input/Output – RS-232, bi-directional, confi gurable 1200-19.2K. Transmits weight and scale status whenever a "W" is sent by remote device.

Scale Weight – 16 lbs, standard confi guration

Shipping Weight – 24 lbs, standard confi guraton